Description
Heavy duty construction throughout. From the planetary gear box and the augers to the frame, extra strength is built into every VALMETAL T.M.R. Mixer.
On the mobile models, the discharge system features a fold-up conveyor and an hydraulically powered door to regulate the flow of feed from the tractor seat.
Features:
- Block valves for tractor with only one set of hydraulic outlets
- UHMW or stainless steel bottom and side liners
- Manual flap
- Hydraulic flap
- Magnets in discharge flap
- Special discharge conveyor lengths
Drive System
Sprockets and heavy chains run in an enclosed oil bath to eliminate any contamination. Outside grease fitting bank for bearings on all models for easy maintenance.
Precise Feed Delivery
The hydraulically driven twin discharge augers maintain constant feed flow and require less maintenance.
The 4 mixing augers are equipped with hay relief notches. The lower augers rotate against “cutting bars” to tear apart and trim the long stems during the mixing process.
Energy Efficient
Heavy planetary gear box means less chains and sprockets and requires less horsepower. Four weigh bar scale system for accuracy. The drive system is protected by a simple shear bolt, easy to replace.
Various models of electronic digital scale systems are available.
-Simple read-up model
-model with preset point for light and horn ( load or unload)
-Model with batching capabilities
-Mobile mixers feature : 4 load cell system
| Trailer Mixer Model |
210 | 270 | 325 | 375 | 450 |
| Mixing capacity (cu. ft.) | 210 | 270 | 325 | 375 | 450 |
| Overall length(in.) | 164 1/2 | 185 1/2 | 212 1/2 | 213 | 237 |
| Tread width (in.) | 90 | 90 | 92 | 98 | 98 |
| Closed conveyor overall width (in.) | 97 | 97 | 98 | 101 | 101 |
| Opened conbeyor overall width (in.) | 101 | 101 | 102 | 115 | 115 |
| Overall height (in.) | 95 | 95 | 101 | 105 | 105 |
| Mixing box size (in.) | 84×96 | 84×120 | 84×144 | 84×144 | 84×168 |
| Mixing box sides thickness (in.) | 10 gauge | 10 gauge | 10 gauge | 3/16 | 3/16 |
| Mixing box ends thickness (in.) | 3/16 | 3/16 | 3/16 | 3/16 | 3/16 |
| Mixing box bottom thickness (in.) | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 |
| Bottom auger – diameter (in.) | 20 | 20 | 20 | 24 | 24 |
| Bottom auger – flighting thickness (in.) | 1/2 | 1/2 | 1/2 | 5/8 | 5/8 |
| Bottom auger – tube (in.) | 6 5/8 X .432 | 6 5/8 X .432 | 6 5/8 X .432 | 8 5/8X.5 | 8 5/8X.5 |
| Top auger – diameter (in.) | 20 | 20 | 20 | 24 | 24 |
| Top auger – flighting thickness (in.) | 3/8 | 3/8 | 3/8 | 3/8 | 3/8 |
| Top auger – tube (in.) | 4 1/2X.337 | 4 1/2X.337 | 4 1/2X.337 | 6 5/8X.432 | 6 5/8X.432 |
| Bottom shaft diameter (in.) | 3 | 3 | 3 | 3 1/2 | 3 1/2 |
| Top shaft diameter (in.) | 2 1/2 | 2 1/2 | 2 1/2 | 3 | 3 |
| Roller chains | 100-120 | 100-120 | 100-120 | 100-140 | 100-140 |
| Approximate weight (lbs) | 7 400 | 8 100 | 9 700 | 11 100 | 12 600 |
| Discharge opening size (in.) | 32X20 | 32X20 | 32X20 | 32X20 | 32X20 |
| Tires | 16.5L16.1 | 16.5L16.1 | 16.5L16.1 | 16.5L16.1 | 16.5L16.1 |
| 8 ply | 10 ply | 14 ply | 14 ply | 14 ply | |
| Speed reducer | Planetary | Planetary | Planetary | Planetary | Planetary |
