Description
Heavy duty construction throughout. From the planetary gear box and the augers to the frame, extra strength is built into every VALMETAL T.M.R. Mixer.
On stationary models, a convenient door opening system allows the operator to regulate the proper feed discharge and avoid overloading the conveying or feeding system.
Features:
- UHMW or stainless steel bottom and side liners
- Manual flap
- Hydraulic flap
- Magnets in discharge flap
- Special discharge conveyor lengths
- Electric door opening system, allowing remote operation
The 4 mixing augers are equipped with hay relief notches. The lower augers rotate against “cutting bars” to tear apart and trim the long stems during the mixing process.
Various models of electronic digital scale systems are available.
-Simple read-up model
-model with preset point for light and horn ( load or unload)
-Model with batching capabilities
-Stationary models require only 1 load cell.
| Stationary Model | 210 | 270 | 325 |
| Mixing capacity (cu. ft.) | 210 | 270 | 325 |
| Overall length (in.) | 124 | 148 | 172 |
| Overall height (in.) | 85 | 85 | 85 |
| Overall width (in.) | 86 | 86 | 86 |
| Mixing box size (in.) | 84×96 | 84×120 | 84×144 |
| Mixing box sides thickness (in.) | 10 gauge | 10 gauge | s10 gauge |
| Mixing box ends thickness (in.) | 3/16 | 3/16 | 3/16 |
| Mixing box bottom thickness (in.) | 3/8 | 3/8 | 3/8 |
| Bottom auger – diameter (in.) | 20 | 20 | 20 |
| Bottom auger – flighting thickness (in.) | 1/2 | 1/2 | 1/2 |
| Bottom auger – tube (in.) | 6 5/8 X .432 | 6 5/8 X .432 | 6 5/8 X .432 |
| Top auger – diameter (in.) | 20 | 20 | 20 |
| Top auger – flighting thickness (in.) | 3/8 | 3/8 | 3/8 |
| Top auger – tube (in.) | 4 1/2 X .337 | 4 1/2 X .337 | 4 1/2 X .337 |
| Bottom shaft diameter (in.) | 3 | 3 | 3 |
| Top shaft diameter (in.) | 2 1/2 | 2 1/2 | 2 1/2 |
| Roller chains | 80-100 | 100-120 | 100-120 |
| Approximate weight (lbs) | 6 500 | 7 100 | 8 600 |
| Discharge opening size (in.) | 18 x 21 | 18 x 21 | 18 x 21 |
