Description
- Agressive, hydraulically driven feed rollers spin and loosen the bale (in either direction) for uniform feeding into the flail shredder.
- The feed rollers are adjustable to fit the size of the bale.
- The flail shredder has 26 1/2″ x 5 1/2″tempered spring steel flails and is balanced for smooth, long lasting operation and bearing life.
- Feed grate is adjustable with a one hand lever operation to control the rate of feed and length of cur. Bars are individually removable to match the desired processing conditions.
- The PTO shaft has a constant velocity joint to ensure smooth operation, even when making sharp turns in the feedlot.
- The high sides and large capacity tup minimize spillage.
- The bale fork loads round bales into the processor, eliminating the need for a second tractor.
Bale Pro | Model 6800 | Model 7800 |
Horsepower Required | 85 + | 130 |
Capacity | 2 bales – 6′ long x 6′ diameter, or smaller | 2 bales – 6′ long x 6′ diameter +, or smaller |
Flail Drum Length | 70 1/4″ | 82 1/4″ |
Flail Drum Diameter | 20 5/8″; balanced | 24 3/4″, balanced |
Flail Drum Bearings | 1 3/4″ | 1 3/4″ |
Flails | 26 – 7/16″ x 6 7/16″ tempered sping steel | 30 – 1/2″ x 6 7/16″ tempered sping steel |
Tires | 2 – 11L x 15 Hwy Service | 2 – 12.5L x 15 Hwy Service |
Height | 105 1/2″ | 108″ |
Length | 179″ | 191″ |
Width | 104 1/2″ | 104 1/2″ |
Weight | 4000 lbs | 4400 lbs |
PTO Requirements | 1000 rpm | 1000 rpm |
Hydraulics | Dual remote: 2000 psi | Dual remote: 2000 psi |
Cylinders | 2 – 3″ x 16″; 1 1/2″ shaft | 2 – 3″ x 16″; 1 1/2″ shaft |
