"

Valmetal Four Auger Trailer Mixer

Heavy duty construction throughout. From the planetary gear box and the augers to the frame, extra strength is built into every VALMETAL T.M.R. Mixer.

On the mobile models, the discharge system features a fold-up conveyor and an hydraulically powered door to regulate the flow of feed from the tractor seat.

Features:

  • Block valves for tractor with only one set of hydraulic outlets
  • UHMW or stainless steel bottom and side liners
  • Manual flap
  • Hydraulic flap
  • Magnets in discharge flap
  • Special discharge conveyor lengths


Drive System
Sprockets and heavy chains run in an enclosed oil bath to eliminate any contamination. Outside grease fitting bank for bearings on all models for easy maintenance.


Precise Feed Delivery
The hydraulically driven twin discharge augers maintain constant feed flow and require less maintenance.


The 4 mixing augers are equipped with hay relief notches. The lower augers rotate against "cutting bars" to tear apart and trim the long stems during the mixing process.


Energy Efficient
Heavy planetary gear box means less chains and sprockets and requires less horsepower. Four weigh bar scale system for accuracy. The drive system is protected by a simple shear bolt, easy to replace.


Various models of electronic digital scale systems are available.
-Simple read-up model
-model with preset point for light and horn ( load or unload)
-Model with batching capabilities
-Mobile mixers feature : 4 load cell system

Trailer Mixer Model
210 270 325 375 450
Mixing capacity (cu. ft.) 210 270 325 375 450
Overall length(in.) 164 1/2 185 1/2 212 1/2 213 237
Tread width (in.) 90 90 92 98 98
Closed conveyor overall width (in.) 97 97 98 101 101
Opened conbeyor overall width (in.) 101 101 102 115 115
Overall height (in.) 95 95 101 105 105
Mixing box size (in.) 84x96 84x120 84x144 84x144 84x168
Mixing box sides thickness (in.) 10 gauge 10 gauge 10 gauge 3/16 3/16
Mixing box ends thickness (in.) 3/16 3/16 3/16 3/16 3/16
Mixing box bottom thickness (in.) 3/8 3/8 3/8 3/8 3/8
Bottom auger - diameter (in.) 20 20 20 24 24
Bottom auger - flighting thickness (in.) 1/2 1/2 1/2 5/8 5/8
Bottom auger - tube (in.) 6 5/8 X .432 6 5/8 X .432 6 5/8 X .432 8 5/8X.5 8 5/8X.5
Top auger - diameter (in.) 20 20 20 24 24
Top auger - flighting thickness (in.) 3/8 3/8 3/8 3/8 3/8
Top auger - tube (in.) 4 1/2X.337 4 1/2X.337 4 1/2X.337 6 5/8X.432 6 5/8X.432
Bottom shaft diameter (in.) 3 3 3 3 1/2 3 1/2
Top shaft diameter (in.) 2 1/2 2 1/2 2 1/2 3 3
Roller chains 100-120 100-120 100-120 100-140 100-140
Approximate weight (lbs) 7 400 8 100 9 700 11 100 12 600
Discharge opening size (in.) 32X20 32X20 32X20 32X20 32X20
Tires 16.5L16.1 16.5L16.1 16.5L16.1 16.5L16.1 16.5L16.1
  8 ply 10 ply 14 ply 14 ply 14 ply
Speed reducer Planetary Planetary Planetary Planetary Planetary