Valmetal Four Auger Mixer

Heavy duty construction throughout. From the planetary gear box and the augers to the frame, extra strength is built into every VALMETAL T.M.R. Mixer.

On stationary models, a convenient door opening system allows the operator to regulate the proper feed discharge and avoid overloading the conveying or feeding system.

Features:

  • UHMW or stainless steel bottom and side liners
  • Manual flap
  • Hydraulic flap
  • Magnets in discharge flap
  • Special discharge conveyor lengths
  • Electric door opening system, allowing remote operation


The 4 mixing augers are equipped with hay relief notches. The lower augers rotate against "cutting bars" to tear apart and trim the long stems during the mixing process.


Various models of electronic digital scale systems are available.
-Simple read-up model
-model with preset point for light and horn ( load or unload)
-Model with batching capabilities
-Stationary models require only 1 load cell.
Stationary Model 210 270 325
Mixing capacity (cu. ft.) 210 270 325
Overall length (in.) 124 148 172
Overall height (in.) 85 85 85
Overall width (in.) 86 86 86
Mixing box size (in.) 84x96 84x120 84x144
Mixing box sides thickness (in.) 10 gauge 10 gauge s10 gauge
Mixing box ends thickness (in.) 3/16 3/16 3/16
Mixing box bottom thickness (in.) 3/8 3/8 3/8
Bottom auger - diameter (in.) 20 20 20
Bottom auger - flighting thickness (in.) 1/2 1/2 1/2
Bottom auger - tube (in.) 6 5/8 X .432 6 5/8 X .432 6 5/8 X .432
Top auger - diameter (in.) 20 20 20
Top auger - flighting thickness (in.) 3/8 3/8 3/8
Top auger - tube (in.) 4 1/2 X .337 4 1/2 X .337 4 1/2 X .337
Bottom shaft diameter (in.) 3 3 3
Top shaft diameter (in.) 2 1/2 2 1/2 2 1/2
Roller chains 80-100 100-120 100-120
Approximate weight (lbs) 6 500 7 100 8 600
Discharge opening size (in.) 18 x 21 18 x 21 18 x 21