Art's Way Rolling Hopper Auger Conveyor

All Augers with Rolling Hoppers are constructed from 12 ga. tube and ¼” flighting. They are double flighted in high wear areas in the hopper and drive section. These augers feature internal drive with externally mounted gear boxes for proper venting and easier maintenance. The CV power shaft with shear clutch provides a smooth drive and overload protection.

The 10” Auger with Rolling Hopper is raised with a hydraulically driven worm winch lift. The 12” Auger with Rolling Hopper is raised with a hydraulic cylinder lift. The discharge spout features a standard relief door.

About the Rolling Hopper – This low profile hopper has an adjustable clearance height of 10-3/4”, 12-1/4” and 13-3/4”. The hopper opening on 10” models is 60”Lx32”W; it is 60”Lx48”W on 12” models. It may be operated and transported on the right or left side of the auger. It features a mechanically driven internal drive with pneumatic tires and rubber flex extension. A Power Wheel kit for lateral movement of the hopper is available for the 12” hopper.

Standard Features:

  • 12 gauge tube; 1/4” flighting
  • Lower gear box with internal drive shaft
  • 40” shielded CV IID with shear clutch
  • Discharge relief drop spout
  • Mechanically driven internal drive rolling hoper with pneumatic tires and rubber flex extension
  • 10” models feature a hydraulically driven worm winch lift with hydraulic motor
  • 12” models feature a hydraulic cylinder lift
  • 12”-122 model features a worm winch
  • Tapered roller bearing hubs

Options:

  • 10” 3’ flexible downspout,
    12” 3’ flexible downspout
  • 12” hopper power wheel kit
  • 12” x 43” bucket spout

10” Rolling Hopper - adjustable clearance height of 10-3/4”, 12-1/4” or 13-3/4”; 60” L x 32” W opening
12” Rolling Hopper - adjustable clearance height of 10-3/4”, 12-1/4” or 13-3/4”; 60” L x 48” W opening


Low transport height.